FAQs | Find Answers

Search Results

Results 71 - 80 of 518

Recommended Links
  1. How to : Change wireless Channel on User-Friendly Firmware.
    [Answer ID: 14479]
     1-Connect PC to router and Open WEB UI in browser : 192.168.11.1.2- Go to "Wireless Config" | Basic Tab     Select channel from "Wireless Channel"  drop down menu. Alternatively, 1- From Easy Setup select "Wireless SSID..." or "Basic Wireless setup" ...
  2. How to : Access management WEB UI of WLI-H4-D1300 .
    [Answer ID: 14484]
    How to : Access management WEB UI of  WLI-H4-D1300  . WLI-H4-D1300 AirStation is an AC1300 / N450 4-Port Gigabit Dual Band Wireless Ethernet Bridge.  Default IP address is 1.1.1.1Default User Name : admin...
  3. How to Get Around the error message "RAID Error E13 ARRAYx Error” on the LCD panel
    [Answer ID: 14517]
    A hard drive may have failed in RAID array X. Replace the hard drive and rebuild the RAID array. TeraStation 4000 – How to replace a hard drive and rebuild a RAID array in the TeraStation?...
  4. How to Use Port Trunking
    [Answer ID: 14522]
    Two Ethernet cables can be used to establish two separate communication routes providing LAN port redundancy and improving communication reliability. The use of two Ethernet cables enables access to the TeraStation even if one of the cables is disconnected....
  5. How to Check Drives (TeraStation 5000 series)
    [Answer ID: 14536]
    A disk check tests the data on a drive in the TeraStation or connected via USB for integrity. Errors are fixed automatically. With large drives, a disk check may run for many hours. Shared folders cannot be accessed during a disk check. Do not turn off the TeraStation until the disk check is finished. Use the procedure below to run a disk check....
  6. Do I need to download and install the “Microsoft iSCSI Software Initiator”?
    [Answer ID: 14546]
    Windows XP, Windows 2000, Windows Server 2003, Windows 2000 Server Before using iSCSI equipment with Windows XP, Windows 2000, Windows Server 2003, or Windows 2000 Server, download and install the "Microsoft iSCSI Software Initiator"....
  7. Restrictions on Active Directory
    [Answer ID: 14569]
    There are some restrictions to synchronize with Active Directory. •A multiple domain is not supported. The product can be used only under a single domain. •To have the TeraStation join an Active Directory domain, configure it to use a DNS server that can resolve names for the Active Directory domain....
  8. How to: Start AOSS on wireless router ?
    [Answer ID: 14576]
     AOSS is enabled by default on Buffalo Routers. By pushing AOSS button on the unit, the AOSS connection process on the router is activated.You should try to activate AOSS on cient and next, push AOSS button on Router....
  9. How do I setup VPN (PPTP) on Buffalo Router with Professional Firmware (DD-WRT)?
    [Answer ID: 14579]
    Virtual Private Network (VPN) allows for a secure connection to home or branch office over Internet. VPN consists of two parts the server which is implemented in the Router and the Client VPN which is used by the client PC application or OS to access office or home network. Professional firmware implements standard VPN (PPTP - Point to Point Tunneling Protocol server) which is supported by windows OS VPN Client....
  10. How to: Access home or branch office over Internet using Proffesional Firmware(DD-WRT)?
    [Answer ID: 14580]
    Virtual Private Network (VPN) allows for a secure connection to home or branch office over Internet. VPN consists of two parts the server which is implemented in the Router and the Client VPN which is used by the client PC application or OS to access office or home network. Professional firmware implements standard VPN (PPTP - Point to Point Tunneling Protocol server) which is supported by windows OS VPN Client....
< Previous  4  5  6  7  8  9  10  11  12  Next >

Refine your search

Select Product / OS & Hardware

      Enter Keywords or a specified ID